View Single Post
  #7  
Old 2019-07-22, 10:36am
Speedslug's Avatar
Speedslug Speedslug is offline
Phill
 
Join Date: Mar 21, 2009
Location: Winnebago, MN
Posts: 2,282
Default

Oh and make sure if you add water that your water is either distilled or reverse osmosis.

Well water is going to have minerals in it that can change the bead release properties and water softener systems will have some salt in them that also ruins bead release.

I take plumbers emery tape to scuff the surface of my new mandrels after washing the oils form manufacturing them off with dish soap.

And don't try to go with too small of a bead hole either at least to start with.

Have you tried a double coating with letting the first dip air dry for a day or four?

This heat and humidity we have been having in a lot of the US could be adding to the problem as well.


Unfortunately Devardi stuff has been known to have problems and I limit my purchases there to metal things like tools only.
__________________
We have to take care of ourselves so we can take care of each other.
Reply With Quote