View Single Post
Old 2012-05-23, 3:11pm
Arnold Howard Arnold Howard is offline
Join Date: Jun 13, 2007
Posts: 43

Originally Posted by EJohnsonArtGlass View Post
Thank you very much for the advice. Last time I had my kiln repaired by a serviceman. I'll ask him if he remembers the location of the break in the element.

I truly hope a loose connector is the problem this time. I will check the connectors and report back here.

If the kiln does not heat at all, a relay may have burned out instead of an element. The muffle has two elements.


Arnold Howard
Paragon Industries, L.P., Mesquite, Texas USA /
Reply With Quote